Product name: Oleamide
Chemical name: (Z)-Octadec-9-enamide
CAS number: 301-02-0
Synonyms: 9-Octadecenamide, oleic acid amide
Product use: Used as a slip agent, lubricant, anti-block agent, and release agent in manufacturing; also used in laboratory and analytical settings
Supplier details: Manufacturer and distributor contact information appears on product labels and technical data sheets provided by suppliers
GHS classification: Not classified as hazardous under GHS criteria
Hazard statements: Product may cause mild eye irritation and skin irritation on prolonged exposure; dust generation during handling can pose slight irritation to respiratory tract
Precautionary statements: Avoid creating dust, wash hands after use, store away from food and beverages, use personal protective equipment to avoid direct contact
Potential health effects: Some individuals report dry skin or mild allergic reactions from repeated exposure; inhaling dust may cause cough or shortness of breath
Chemical identity: Oleamide
Chemical formula: C18H35NO
Concentration: 98% minimum (technical grade)
Impurities: Minor amounts of related fatty acid amides, moisture less than 1%, residual solvents sometimes present below 0.1%
Eye contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy; seek medical attention if irritation develops
Skin contact: Wash with soap and water thoroughly; seek medical help if skin symptoms persist
Inhalation: Move person to fresh air immediately; seek medical attention if symptoms such as coughing or irritation persist
Ingestion: Rinse mouth with water; do not induce vomiting unless told by medical personnel; seek medical attention in case of large accidental ingestion or persistent discomfort
Suitable extinguishing media: Use water spray, foam, carbon dioxide, or dry chemical extinguishers
Specific hazards: Product may form combustible dust concentrations in air if dispersed as a powder; in case of fire, hazardous decomposition products may include oxides of nitrogen and carbon monoxide
Protective equipment for firefighters: Use self-contained breathing apparatus and full protective gear to prevent inhalation of gases and contact with molten product
Explosion data: Avoid dust accumulation and ignition sources; ground and bond all containers during handling
Personal precautions: Use recommended protective equipment including gloves, safety goggles, and dust mask; avoid inhaling particles and skin or eye contact
Environmental precautions: Prevent release into waterways or drains; in the event of large spill, notify local environmental authorities
Cleanup methods: Sweep up and collect spilled material in suitable containers for disposal; minimize dust generation; ventilate area and wash spill site after material pickup
Safe handling advice: Handle in well-ventilated area, avoid breathing dust or vapors, avoid contact with eyes, skin, and clothing, wash thoroughly after handling
Storage requirements: Store in tightly closed containers in a cool, dry, well-ventilated location away from direct sunlight and ignition sources; prevent buildup of dust on surfaces and in storage areas
Incompatible materials: Strong oxidizers, acids, strong bases, and sources of ignition
Occupational exposure limits: No specific limit value set for oleamide, use dust exposure limit values as a reference (e.g., OSHA PEL for nuisance particulates 15 mg/m³ total, 5 mg/m³ respirable)
Engineering controls: Local exhaust ventilation recommended, use non-sparking equipment, minimize airborne dust
Personal protective equipment: Wear chemical safety goggles, protective gloves (nitrile or latex), long-sleeved clothing, and dust mask or respirator (NIOSH-approved) in dusty environments
Hygiene measures: Wash hands before eating, drinking, or smoking; remove contaminated clothing and wash before reuse
Appearance: White to off-white waxy solid or powder
Odor: Slight fatty odor
Melting point: 71-76 °C
Boiling point: >300°C at 760 mmHg
Solubility: Insoluble in water; soluble in alcohols, chloroform, ether
Density: 0.96-0.98 g/cm³ (20°C)
Vapor pressure: Negligible at room temperature
pH: Not applicable (insoluble in water)
Flash point: 225°C
Auto-ignition temperature: Not available
Other properties: Forms an oily surface on heating; low volatility under normal conditions
Reactivity: Stable under normal handling and storage conditions
Chemical stability: Product resists decomposition below 200°C; material may slowly degrade on prolonged exposure to heat or strong light
Hazardous reactions: Contact with strong oxidizers can cause exothermic reactions
Hazardous decomposition products: Nitrogen oxides, carbon dioxide, carbon monoxide may form during fire
Conditions to avoid: Avoid contact with open flames, electrostatic discharge, and strong acidic or basic chemicals
Acute toxicity: Low oral and dermal toxicity based on available animal data (LD50 oral rat >5000 mg/kg)
Skin contact: Mild irritation on sensitive or compromised skin, generally not considered a sensitizer
Eye contact: May cause transient discomfort or redness
Inhalation: Dust can cause mild irritation to respiratory tract if inhaled in significant amounts
Chronic exposure: Prolonged or repeated exposure may cause defatting of skin or allergic reactions in susceptible individuals
Carcinogenicity: Not listed by IARC, NTP, OSHA, or EU as a carcinogen
Mutagenicity, reproductive toxicity: No data indicate genetic or reproductive risks
Ecotoxicity: Material shows low toxicity to aquatic organisms, limited evidence for concern in terrestrial or aquatic systems based on studies of similar fatty amides
Persistence and degradability: Biodegradable under environmental conditions; breaks down to simpler organic compounds via microbial activity
Bioaccumulative potential: Limited potential for bioaccumulation due to low water solubility and expected aerobic breakdown
Mobility in soil: Remains largely immobile as it binds to soils, sediments, and organic matter
Other adverse effects: Product is not classified as hazardous to the environment, proper disposal is still important to minimize any local effects
Waste treatment methods: Dispose of material in accordance with local, regional, and national regulations; avoid landfill disposal in sensitive locations
Preferred disposal: Incineration in licensed chemical waste facility, recycling when applicable, small amounts may go with regular waste if uncontaminated and permitted by local regulation
Contaminated packaging: Rinse thoroughly, recycle where possible, otherwise treat packaging as hazardous waste if residues remain
Environmental hazard: Do not allow bulk quantities to enter surface water, sewer systems, or soil
UN number: Not classified as dangerous goods by DOT, IATA, or IMDG
Proper shipping name: Oleamide
Transport hazard class: None
Packing group: None
Special transport precautions: Keep containers sealed and upright, secure loads to prevent spills, handle as limited-quantity chemical
Environmental hazards during transport: Not regulated for marine or air transport, avoid large uncontrolled releases
U.S. Federal regulations: Listed on TSCA Inventory; not classified as hazardous under OSHA Hazard Communication Standard
EU regulations: Listed under REACH, not classified as dangerous under current European chemical regulations
Canadian regulations: Listed on DSL/NDSL, controlled under WHMIS as non-hazardous
Other international regulations: Product not restricted by UN, IMDG, or ICAO/IATA transport regulations; other specific local requirements may apply
Safety, health, and environmental regulations: Adhere to standard chemical hygiene, storage, and disposal procedures to meet legal compliance and company policy
