Product Name: Cocamide Methyl MEA
Other Names: N-Methyl Cocamide Monoethanolamine, CMMEA
Recommended Use: Used as a non-ionic surfactant and foam booster in shampoos, body washes, and liquid detergents
Manufacturer: [Insert manufacturer's details and emergency contact]
Chemical Formula: C19H41NO3
CAS Number: 861904-71-2
Contact Information for Emergency: [Insert emergency telephone number]
GHS Classification: Eye Irritant (Category 2A), Skin Irritant (Category 2)
Signal Word: Warning
Hazard Statement: Causes serious eye irritation, may cause skin irritation, toxic to aquatic life with long-lasting effects
Precautionary Statements: Wear protective gloves and eyewear, avoid direct skin and eye contact, avoid release into the environment
Pictograms: Exclamation mark, Environmental hazard symbol
Routes of Exposure: Inhalation, ingestion, skin, eye contact
Symptoms: Redness, pain, watering of eyes, skin dryness or cracking
Cocamide Methyl MEA: 85-95%
Fatty Acid Derivatives: Trace amounts
Water: 2-7%
Impurities: Glycerin, residual monoethanolamine, methylamines (below reportable limits)
Exact percentages: Proprietary or trade secret as per regulatory guidance
Inhalation: Remove affected person to fresh air, provide oxygen if breathing is difficult, seek medical attention if symptoms persist
Skin Contact: Remove contaminated clothing, wash skin thoroughly with soap and water, seek medical advice if irritation continues
Eye Contact: Rinse eyes cautiously with plenty of water for 15 minutes, remove contact lenses if easy to do, consult an eye specialist
Ingestion: Rinse mouth with water, do not induce vomiting, seek immediate medical assistance
Advice for Medical Personnel: Treat symptomatically, show this MSDS to attending physician
Suitable Extinguishing Media: Water spray, dry chemical, foam, carbon dioxide
Unsuitable Extinguishing Media: Do not use direct water jet
Special Hazards: Emits toxic fumes of carbon oxides and nitrogen oxides upon combustion
Protective Equipment: Firefighters should wear self-contained breathing apparatus and full protective gear
Advice for Firefighters: Cool exposed containers with water fog to prevent explosion; avoid breathing in vapors and decomposition products
Personal Precautions: Evacuate area, ventilate, avoid inhalation, wear gloves, goggles, and protective clothing
Environmental Precautions: Prevent entry into waterways, drains, or soil
Cleanup Methods: Absorb with earth, sand, or inert absorbent, shovel into suitable container for disposal, wash contaminated area with copious amounts of water
Disposal: Dispose of collected material and cleaning water per local regulations
Decontamination: Decontaminate affected surfaces thoroughly after removal
Handling: Use in well-ventilated areas, avoid skin and eye contact, use recommended personal protective equipment, prevent dust and aerosol generation, practice good industrial hygiene
Storage: Store in original container tightly closed, cool, dry, well-ventilated area, away from incompatible materials such as strong acids, bases, and oxidizing agents
Specific Requirements: Keep away from sunlight, store at room temperature, segregate from food and drink, label clearly
Engineering Controls: Use mechanical ventilation or exhaust systems to keep airborne concentrations below exposure limits
Personal Protective Equipment: Chemical-resistant gloves (nitrile or neoprene), safety goggles or face shield, long-sleeved clothing, protective apron
Respiratory Protection: Use approved respirator if aerosol or vapor is generated
Occupational Exposure Limits: No established specific limit for CMMEA; refer to related surfactant guidelines where available
Hygiene Measures: Wash hands thoroughly after handling, refrain from eating, drinking, or smoking in work area, remove contaminated clothing and wash before reuse
Physical State: Viscous liquid or pale yellow paste
Odor: Faint, fatty, characteristic
pH: Slightly alkaline (typical value: 8-10 for 10% aqueous solution)
Boiling Point: Decomposes before boiling
Melting Point: 20-30°C
Flash Point: >100°C (closed cup)
Solubility: Soluble in water
Density: 0.98 - 1.01 g/cm³
Viscosity: High, depends on concentration and temperature
Vapor Pressure: Negligible
Partition Coefficient (Log Kow): Not determined
Evaporation Rate: Not rapid
Appearance: Off-white to yellow, viscous, semi-solid
Chemical Stability: Stable under normal storage conditions
Reactivity: Non-reactive with most materials under normal conditions
Conditions to Avoid: Excessive heat, open flame, direct sunlight
Incompatible Materials: Strong acids, strong bases, strong oxidizers
Hazardous Decomposition Products: On combustion yields carbon monoxide, carbon dioxide, nitrogen oxides, and possibly other toxic vapors
Polymerization: Product does not undergo hazardous polymerization
Routes of Exposure: Oral, dermal, inhalation, ocular
Acute Toxicity (Estimated): LD50 oral (rat): >5,000 mg/kg
Skin Corrosion/Irritation: Causes mild to moderate irritation on prolonged contact
Serious Eye Damage/Irritation: Causes serious irritation, possible corneal damage
Respiratory Sensitization: No data available, not expected at ambient temperature
Germ Cell Mutagenicity: No evidence from current data
Carcinogenicity: Not classified as carcinogenic according to current international standards
Reproductive Toxicity: No evidence from available studies
Chronic Effects: Repeated or prolonged skin exposure may cause dermatitis
Toxicity to Aquatic Life: Harmful to aquatic organisms, possible long-term adverse effects in aquatic environment
Persistence and Degradability: Readily biodegradable in aerobic conditions
Bioaccumulation: Low potential for bioaccumulation
Mobility in Soil: High solubility increases potential to move into ground and surface waters, but rapid degradation limits persistence
Other Adverse Effects: Large spills can cause significant oxygen depletion in water bodies due to foaming and increased microbial activity
Regulatory Classifications: Subject to local environmental regulations for surfactants
Waste Disposal Methods: Dispose of in accordance with local, regional, and national regulations as chemical waste
Contaminated Packaging: Empty containers must be rinsed thoroughly before disposal or recycling
Recommended Recovery: Incineration or landfilling at approved facilities
Special Precautions: Do not release waste into sewers, surface water, or soil; consult local authorities for further advice
Recycling: Possible if product is not contaminated and meets local regulatory standards
UN Number: Not regulated under UN recommendations
Proper Shipping Name: Not classified as dangerous goods for transport by road, sea, or air
Transport Hazard Class: Non-hazardous
Packing Group: Not assigned
Environmental Hazards: Not considered marine pollutant under IMDG code
Special Precautions for User: Keep containers well-sealed during transport, avoid stacking heavy loads, use secondary containment to prevent leaks or spills, ensure proper labeling in languages required for all regions in transit
USA (TSCA): Listed on the Toxic Substances Control Act inventory
EU (REACH): Registered or exempt according to REACH
Canada (DSL): Listed on Domestic Substances List
Australia (AICS): Listed
Japan (ENCS): Listed
Right-to-Know Information: Subject to reporting in some US states such as New Jersey or California
Labeling Requirements: GHS-compliant hazard statements, precautionary phrases, and pictograms
Occupational Safety: Refer to OSHA, NIOSH, and local occupational health standards
Environmental Legislation: Discharge and waste subject to local legislation concerning surfactants and organics in wastewater
